Відео

Making one tomorrow, thanks.

Great stuff, would you be able to make a squirrel car for a customer?

Very well done, thank you for sharing!

Nice bit of kit there! Great video Jim, thanks for sharing

It was a pleasure to meet you again plus got a chance to have a chat with you and managed to get scanned on the last day just as you were packing away ..i did recive my file thanks sooooooo much to you and the team on the day ...thanks so much Jim

We attended on the Sunday and it was lovely to meet you in person. Keep up the good work Jim 🌞

Super great stuff Jim. I'm learning a lot and getting some terrific inspiration. Thank you!

Does the hose and splitter come with the machine? Or do you have to buy them separately Also what finish did you use on the stool? It looks lovely

Can you cut thin copper with this.

Brilliant Jim, a real work of art. It has given me many ideas for my little garage workshop.

Outstanding 🤙🏻

Great work mate, excellent to watch, but you need a better microphone.

za duzo gadasz za malo pokazujesz

Thanks again bud for the scan. Now to get the superglue out and hood ornament all the parked cars on my street 😂

Your voice sounds just like the voice actor John Cureless as Ephraim ti Horn in the red rising audiobook… it’s fantastic. Anyways, thank you for the very informative video. Exactly what I needed

Wow!

Stunning 😍

Is it seal or seal lite?

Epoxy resins are usually colorless, crystal clear and stain very well. Various methods are used to color casting epoxy resin. Pigments for epoxy resin can have different consistencies and their use varies accordingly. Thicker resin pigments are classified as "pigment pastes" and are used for rich, opaque coloring of the resin. Pigments for resin in a liquid state belong to the category of "pigment solutions" and are used to create transparent, transparent castings. Mica pigment powders for resin are loose materials.

Thanks for taking the time to make the video and show us an actual 3D printed product from the Shapr3D software. Well done mate Question: the visible layer lines, is that because the Ender printer doesn't have the facility to print thinner or nearly invisible layer lines, or is this a speed / machine setting choice you made? Thank you.

I have never seen Nick as calm and taciturn as the moment he was scanned 😂

thanks for this, the spider crab shell was great, nice to see!

That looks cool! Will definitely come and find you at Makers! So there is now a bust of Nick floating around 😂

Good morning Jim, interesting video. I hope to see you on the 19th 🌞

That's the most still I've ever seen Nick stand!

Haha awesome buddy this looks so cool . Thanks for popping over . See you at the show everyone will love this 🎉

Great job on the egg shape. Amber is my favorite color.

Hej from Jokkmokk (Sweden) the smallest Puukko is normally used to mark the reindeer calves.

I have the most updated version on my pc and the app won’t open at all. Any suggestions? I haven’t been able to try it out because it won’t open. Keeps crashing

Very good job 👍

A simple tip - don't cut round bowl blanks! Cut them with straight cuts to make octagons instead; it is simple to turn the octagons to round once on the lathe. This avoids the problem of consistent curved cuts altering the set of your blade teeth, as described in the video.

Lovely bit of kit Jim I recently picked up a second hand bs350s and I’m really pleased with it record power make some great machinery. Looking forward to seeing you at makers mate 👍🏻

Great insight into the sonic pad, I've had me s1 pro just a few days and I'm really impressed It I just wish it was faster!

Good morning Jim. Another interesting video. I do Like Record Power machinery and the people at Yandles could not be more helpful. Just a shame it’s a four hour drive 🌞

Lovely bit of kit

Would you be able to link to any guides or files for building a diy turntable like you've shown in the video?

Great video. Got my sycamore and my milliput!! Away I go 😊

@Scotdavis> can you please let me know if i can order this from Amazon. and what speed of the wood lathe should be used., may I have your email id to send my request. thanks

Open Cell or Closed Cell Foam ?

Thank you so much for this. This is what I'm trying to do, but an RC rabbit or rat instead for my rescue stray adolescent puppy - I'm disabled and walking the pup so much is making my arthritis a lot worse. I think the difference is that I'll just get a car and glue a ton of velcro attachments on top so the dogs can snatch toys off of the car just a platform for high value toys

hello sir , we are real factory from CHINA,and we have following carbon fiber materials to supply to you with the lowest prices at the highest quality materials on the market : 12k 400gsm twill or plain fabric 6k 320gsm twill or plain fabric 3k 280gsm twill or plain fabric 3k 240gsm twill or plain fabric 3k200gsm plain or twill fabric 3k 180gsm plain fabrics 1.5k 140g plain or twill fabric 1k 120g plain or twill 92g plain fabric We have both dry fabric and we can make it into prepreg ,We also weave kevlar, fiberglass fabric etc ,we also have hybrid or Jacquard stain pattern fabrics or 12k tow spread (60gsm .88gsm.100gsm.200gsm )fabric Carbon fiber filament yarn(continuous tow/yarn), short chopped yarn and forged short chopeed prepreg ,dry mat ,thin veil . Fiberglass thin fabric, short chopped yarn and mat ,thin veil etc. pls contact with me via email /wechat / whats app. Email 1: yulongnewmaterials@163.com Email 2: ylnewmaterials01@163.com whats app:+8613360476089 websites: yulong.myaipages.com

Love it. My dog would go crazy to have one.😊

Thanks

To be fair I’ve yet to get anything beyond a pile of mangled filament from my S1 no matter how many calibrations I do I’ve been over z axis esteps flow rates the lot. This printer is not for beginners. Certainly not investing in anything else. Nor do I understand why I need to.

Hi Jim thanks for posting,I have just purchased the Ender 3 S1 pro, is the enclosure ok for this model ? Is there enough room at the rear for the power cable or does it press against the housing ? Your opinion would be much appreciated cheers Paul

Very nice unit and well built too! How did you measure the4 diameter and or circumference of the tapered piece? Thanks for another great video. Tom

hello, thanks for the video. What is the resolution of the device? Has anyone used exocad in the dental industry?

Have you built Nevs family yet& any chance on videos for them or skulls?

Is it compatible with xtool d1

are you able to send the final scanned image to a 3D printer and print the imag in a tutorial video please?